Pull Rod for W112 Front Axle Valve, for all W112, 163.5mm, Mercedes Benz A1123201389

This Pull Rod  fits all front axles, left and right side of the W112 with 163.5mm rod length

For the Pull Rod you may also need  2 M6 Locking Nuts ( one RH and one LH thread nut), Mercedes Benz part numbers are 000934 006006 (RH) and 000934006012 (LH).

The old rods are often bent and threads corroded which makes is difficult to adjust the correct riding height. With new Pull Rods it is so much easier to adjust the correct riding height.  

Make sure that both Ball Joints and Locking Nuts are in good working order, threads are moving well and are lubricated. Bad Ball Joints and Locking nuts will need to be replaced. 

For correct height adjustment procedure see my article at www.600airsuspension.com 

http://www.600airsuspension.com/resources/140408-manual-for-axle-height-adjustment.pdf

also available in Spanish 

http://www.600airsuspension.com/resources/141020_Ajuste_e_instalaci%C3%B3n_de_las_v%C3%A1lvulas_para_el_Mercedes-Benz_W100_W109_y_W112.pdf

Mercedes Benz  part numbers

A1123201389

A112 320 1389

A112 320 13 89

A112-320-1389

A112-320-13-89

1123201389

112 320 1389

112 320 13 89

112-320-1389

112-320-13-89