Pull Rod for early W109.018 (Chassis Number 004763 and before), 6.3 engine, Front Right axle, 158 mm , Mercedes Benz A1093200589
This Pull Rod fits the Front Right axle of the early W109.018 (Chassis Number up to 004763), 6.3 engine with 158mm rod length.
W109.018, 6.3 engines with Chassis Numbers 004764 and after will require Pull Rod length of 140.5mm for Front Right axle, Mercedes Benz part number is A1123202089 This Pull Rod fits the W109.056/57, 3.5 and 4.5 Front Left axle.
For the Pull Rod you may also need 2 M6 Locking Nuts ( one RH and one LH thread nut), Mercedes Benz part numbers are 000934 006006 (RH) and 000934006012 (LH).
The old rods are often bent and threads corroded which makes is difficult to adjust the correct riding height. With new Pull Rods it is so much easier to adjust the correct riding height.
Make sure that both Ball Joints and Locking Nuts are in good working order, threads are moving well and are lubricated. Bad Ball Joints and Locking nuts will need to be replaced.
For correct height adjustment procedure see my article at www.600airsuspension.com
also available in Spanish
Mercedes Benz Part Numbers
A109 320 0589
A109 320 05 89
109 320 0589
109 320 05 89
We Also Recommend
Mercedes Benz Air Compressor Repair Kit, W112/W109/W100, Mercedes Benz 000-586-01-13
Mercedes Air Compressor Piston Ring Set 2.5mm (2.5/2.5/2.5/4.0), W112/W109/W100 - Fits Knorr Compressors Types
Mercedes Benz Air Fitting Seal Ring: Inner Seal Ring for Standard 14mm Hex Fitting, W112/W109/W100, Mercedes Benz 112-997-04-40
Mercedes Benz Air Fitting Seal Ring: Outer Seal Ring for Standard 14mm Hex Fitting , Mercedes Benz 002-997-85-45