Flex Hose for W109.015 and late W112 , A-Port, Mercedes Benz A1099970282
This is the longer Hose with a 'hook fitting' at the Axle Valve for the later W112 (chassis number 8910 and after) and W109.15, the length is ca. 250mm measured without the fittings, located at the junction to A- Port of left side VNC Axle Valve, see #35 in diagram.
Note: The W109.016 (M130 engine I6) A-Port Hose has a different part number.
The new Flex Hose comes with new rubber hose and new fittings. The crimping is the original pattern MB used back then.
Mercedes Benz part number
A109 997 0282
A109 997 02 82
109 9970 282
109 997 02 82
We Also Recommend
Mercedes Benz Air Compressor Repair Kit, W112/W109/W100, Mercedes Benz 000-586-01-13
Pressure Gauge Set for analysis of the W100, W112 and W109 Air Suspension System
Mercedes Benz Air Fitting Seal Ring: Inner Seal Ring for Standard 14mm Hex Fitting, W112/W109/W100, Mercedes Benz 112-997-04-40
Mercedes W112, W109 and W100 Pull Rod Ball Joint Set, 2 pieces, RH and LH Ball Joint, Mercedes Benz112 327 00 63 (RH), 112 327 01 63 (LH)