Pull Rod for W112 Front Axle Valve, for all W112, 163.5mm, Mercedes Benz A1123201389
This Pull Rod fits all front axles, left and right side of the W112 with 163.5mm rod length
For the Pull Rod you may also need 2 M6 Locking Nuts ( one RH and one LH thread nut), Mercedes Benz part numbers are 000934 006006 (RH) and 000934006012 (LH).
The old rods are often bent and threads corroded which makes is difficult to adjust the correct riding height. With new Pull Rods it is so much easier to adjust the correct riding height.
Make sure that both Ball Joints and Locking Nuts are in good working order, threads are moving well and are lubricated. Bad Ball Joints and Locking nuts will need to be replaced.
For correct height adjustment procedure see my article at www.600airsuspension.com
also available in Spanish
Mercedes Benz part numbers
A112 320 1389
A112 320 13 89
112 320 1389
112 320 13 89
We Also Recommend
Mercedes Benz Air Compressor Repair Kit, W112/W109/W100, Mercedes Benz 000-586-01-13
Mercedes Air Compressor Piston Ring Set 2.5mm (2.5/2.5/2.5/4.0), W112/W109/W100 - Fits Knorr Compressors Types
Mercedes Benz Air Fitting Seal Ring: Inner Seal Ring for Standard 14mm Hex Fitting, W112/W109/W100, Mercedes Benz 112-997-04-40
Mercedes Benz Air Fitting Seal Ring: Outer Seal Ring for Standard 14mm Hex Fitting , Mercedes Benz 002-997-85-45