Pull Rod for W100, W112 and W109, for all rear axles, 110mm, Mercedes Benz A1123201589
This Pull Rod fits all rear axles of all air suspension cars W100, W112 and W109, with 110mm rod length.
For the Pull Rod you may also need 2 M6 Locking Nuts ( one RH and one LH thread nut), Mercedes Benz part numbers are 000934 006006 (RH) and 000934006012 (LH).
The old rods are often bent and threads corroded which makes is difficult to adjust the correct riding height. With new Pull Rods it is so much easier to adjust the correct riding height.
Make sure that both Ball Joints and Locking Nuts are in good working order, threads are moving well and are lubricated. Bad Ball Joints and Locking nuts will need to be replaced.
For correct height adjustment procedure see my article at www.600airsuspension.com
also available in Spanish
Mercedes Benz part numbers
A112 320 1589
A112 320 15 89
112 320 1589
112 320 15 89
We Also Recommend
Mercedes Benz Air Compressor Repair Kit, W112/W109/W100, Mercedes Benz 000-586-01-13
Pressure Gauge Set for analysis of the W100, W112 and W109 Air Suspension System
Mercedes Air Compressor Piston Ring Set 2.5mm (2.5/2.5/2.5/4.0), W112/W109/W100 - Fits Knorr Compressors Types
Mercedes W112, W109 and W100 Pull Rod Ball Joint Set, 2 pieces, RH and LH Ball Joint, Mercedes Benz112 327 00 63 (RH), 112 327 01 63 (LH)